A methodology for use of digital image correlation for hot mix asphalt testing

Estefany Ramos, University of Texas at El Paso

Abstract

Digital Image Correlation (DIC) is a relatively new technology which aids in the measurement of material properties without the need for installation of sensors. DIC is a noncontact measuring technique that requires the specimen to be marked with a random speckled pattern and to be photographed during the test. The photographs are then post-processed based on the location of the pattern throughout the test. DIC can aid in calculating properties that would otherwise be too difficult even with other measuring instruments. The objective of this thesis is to discuss the methodology and validate the use of DIC in different hot mix asphalt (HMA) tests, such as, the Overlay Tester (OT) Test, Indirect Tensile (IDT) Test, and the Semicircular Bending (SCB) Test. The DIC system provides displacements and strains in any visible surface. The properly calibrated 2-D or 3-D DIC data can be used to understand the complex stress and strain distributions and the modes of the initiation and propagation of cracks. The use of this observational method will lead to further understanding of the complex boundary conditions of the different test, and therefore, allowing it to be implemented in the analysis of other materials. The use of digital image correlation will bring insight and knowledge onto what is happening during a test.

Subject Area

Civil engineering|Materials science

Recommended Citation

Ramos, Estefany, "A methodology for use of digital image correlation for hot mix asphalt testing" (2015). ETD Collection for University of Texas, El Paso. AAI10003082.
https://scholarworks.utep.edu/dissertations/AAI10003082

Share

COinS